VN SEAL 104W. TWO COMPONENT WALL WATERPROOFING. WHITE, JUST ROLL THE COLOR IF YOU WANT (NO PUTTY NEEDED). CONSUMPTION 1,5 KGS / 1M2 / 1 LAYER (LB CHEMISTRY)
TWO COMPONENT WALL WATERPROOFING VN SEAL 104W
SET 15KGS : 1.000.000 VND
SET 30KGS : 1.800.000 VND
PRODUCT PICTURES
Description
VNSEAL 104W is a two component, white colour, flexible cementitious waterproofing membrane consisting of a synthetic resin mixed with a blend of selected cement and well-graded fillers.
When mixed, VNSEAL 104W becomes a smoooth slurry and is easily applied by brush, roller or suitable spraying equipment.
VNSEAL 104W can be applied onto damp substrates. The cured membrane is flexible, durable and weather resistant and has excellent adhesion to most building substrates. Its unique chemical structure provides a breathable membrane that is permeable to water vapour and yet impermeable to water. VNSEAL 104W is capable of bridging hairline cracks.
Typical Uses:
• Waterproofing of Basement walls and lift pits
• Waterproofing of potable water tanks, waterproofing of reservoirs, culverts, storm drains, canal, water retaining and water excluding structures.
• Waterproofing of kitchens and toilets
• Waterproofing of balconies and planter boxes
• Waterproofing of swimming pools and water features
• Waterproofing to precast gable end walls
• Waterproofing to RC flat roof (re-roofing-exposed and concealed applications) and gutters.
• Waterproofing to external wall prior to installation of claddings.
Advantages:
• Pre-packed – Easy to mix and apply
• Excellent waterproofing qualities – able to withstand high hydrostatic pressure
• Excellent adhesion to concrete, masonry, ceramics, natural and artificial
• Flexible able to bridge hairline cracks up to 2mm
• Does not contain chloride or other corrosive salts which cause efflorescence
• Non – toxic- suitable for use in waterproofing of potable water tanks
• Able to withstand light foot tracfficking
• Can be applied onto damp substrates
• Weathering resistant
Surface Praparation:
The substrates must be clean and sound, free of dust and loose particles. Laitance, oil , grease, mould release agents or cring compound must be removed from concrete surfaces by using wire brush, scabbler or other means. Ensure sufficient gradient to allow water to run off.
It is recommended that a cement & sand fillet be formed at all corners to receive the waterproofing membrane.
Prior to the application of the waterproofing membrane, dampen the substrate with water while ensuring that no free water is present on the surface.
Mixing Instructions:
Pour Part A (liquid) into Part B (White powder)container and mix with a slow speed mechanical mixer until homogenous and lump free. Allow the mix to stand for 5 minutes and re-stir manually before use.
Application:
For horizontal and vertical surfaces, a roller, brush or spray gun, may be used to apply the slurry. Care must be taken to ensure that air is not entrapped in the membrane
Apply the first coat of VNSEAL 104W and allow it to dry. At the same time, ensure that all joints and corners are properly coated, preferable with a brush. Allow membrane to dry for approximately 2 hours before application of the second coat
VNSEAL 104W – the professional’s choice of quality products and system for building construction
Shelf life
Expiry date 18 months from the production date
Storage conditions
Dry, cool, shaded place
Packaging
1) Combo A: 10kg - B: 5kg
Component A is White powder: 10kg/barrel
Component B is milky white liquid: 5kg/plastic can
2) Combo A: 20kg - B: 10kg
Component A is White powder: 20kg/barrel
Component B is milky white liquid: 10kg/plastic can
rapid set concrete lbchemistry
885,000 vnđ
1,031,000 vnđ
WATERPROOFING CONCRETE WATER TANKS C1B
295,000 vnđ
295,000 vnđ
CONCRETE FLOOR DUSTPROOF PAINT C3M
412,000 vnđ
WATERPROOFING CONCRETE FLOOR VN SEAL 107
826,000 vnđ
CONCENTRATE WATERPROOFING NUMBER-1
295,000 vnđ
HIGH STRENGTH CONCRETE ADDITIVES CR7
150,000 vnđ
HIGH STRENGTH NON SHRINK GROUT VGROUT8
520,000 vnđ
HIGH STRENGTH NON SHRINK GROUT VGROUT6
353,000 vnđ
NON METALLIC DRY SHAKE FLOOR HARDENER BOT
288,000 vnđ
140,000 vnđ
WATERPROOFING MIXED WITH CEMENT VN-1F
198,000 vnđ
738,000 vnđ
248,000 vnđ
CONCRETE REPAIR MORTAR REPAIR1
1,000,000 vnđ
8,000,000 vnđ
65,000 vnđ
BONDING AGENT FOR OLD AND NEW CONCRETE CLATEX
372,000 vnđ
623,000 vnđ
HIGH GLOSS RED BRICK PAINT C2K
412,000 vnđ
BEST WATERPROOFING FOR CONCRETE ROOF VN SEAL 104
1,240,000 vnđ
1,031,000 vnđ
960,000 vnđ
412,000 vnđ
ADDITIVES FOR SPRAYED CONCRETE
960,000 vnđ
2,200,000 vnđ
CEMENTITIOUS SELF LEVELING VFLOOR1
377,000 vnđ
0918.599.464
0949.789.791
- Powered by IM Group
Send your comment